Category: System

AccuBattery v2.0.12 [Pro]
Requirements: 7.0+
Overview: Accu​Battery protects battery health, displays battery usage information, and measures battery capacity (mAh) based on science.

● Designed to keep your battery in the best shape you can – AndroidHeadlines

Accu​Battery protects battery health, displays battery usage information, and measures battery capacity (mAh) based on science.

● BATTERY HEALTH
Batteries have a limited lifespan. Every time you charge your device, it wears out the battery, lowering its total capacity. Scientific research shows that battery lifespan can be extended up to 200%, when you charge your device to only 80%.

– Use our charge alarm to prolong your battery lifespan.
– Discover how much battery wear was endured during your charge session.

● BATTERY USE
Accu​Battery measures the actual battery usage using information from the battery charge controller. Battery usage per app is determined by combining these measurements with information on which app is in the foreground. Android calculates battery usage using pre-baked profiles that device manufacturers provide, like how much power the CPU uses. In practice however, these numbers tend to be highly inaccurate.

– Monitor how much battery your device is using
– Know how long you can use your device when it’s active or in standby mode
– Find out how much power each app uses.
– Check how often your device gets woken up from deep sleep.

● CHARGE SPEED
Use Accu​Battery to find the fastest charger and USB cable for your device. Measure the charging current (in mA) to find out!

– Check how fast your device is charging when the screen is on or off.
– Know how long it takes to charge your phone and when it’s finished.

● HIGHLIGHTS
– Measure real battery capacity (in mAh).
– Use the charge alarm to prolong battery lifespan.
– See how much wear your battery sustains with each charge session.
– Look up the discharge speed and battery consumption per app.
– Remaining charge time – know how long it takes before your battery is charged.
– Remaining use time – know when you will run out of battery.
– Screen on or screen off estimations.
– Check the percentage of deep sleep, when the device is in standby mode.
– Ongoing notification for real time battery statistics at a glance.

● PRO FEATURES
– Real-time CPU and power usage overlay for spotting battery draining processes.
– Use Dark and AMOLED black themes to save energy.
– Access to historical sessions older than 1 day.
– Detailed battery statistics in notification.
– No ads

We’re a small, independent app developer with a focus on quality and passion for battery statistics. AccuBattery doesn’t require access to privacy-sensitive information and doesn’t make false claims. If you like the way we work, support us by upgrading to the Pro version.

Tutorial: _https://accubattery.zendesk.com/hc/en-us
Need help? _https://accubattery.zendesk.com/hc/en-us/requests/new
Website: _http://www.accubatteryapp.com
Research: _https://accubattery.zendesk.com/hc/en-us/articles/210224725-Charging-research-and-methodology

What’s New:
– Charging sessions with a charge of at least 60^ are now used to calculate battery health. For more information, see the online help.
– NEW! Graph of the battery status on the health screen.
– NEW! Daily/weekly/monthly charts on the history screen.
– More accurate and consistent discharge statistics with battery health.
– Fix overlay blocking clicks on Android 12+.
– Fix CPU usage overlay for new Android devices.
– Fix WebView language reset bug.
– And many, many other changes and fixes.

This app has no advertisements

More Info:
https://play.google.com/store/apps/details?id=com.digibites.accubattery&hl=en

Download Instructions: credit Dymonyxx
armeabi-v7a arm64-v8a x86 x86_64:
https://ouo.io/AkK4mu

Mirrors:
https://ouo.io/6uhOo3W
https://ouo.io/uiWhpW
https://ouo.io/8WBvhLR

Nox Cleaner – Booster, Master v3.8.0 [Premium]
Requirements: 4.4 and up
Overview: Nox Cleaner is a Smart Cache Cleaner & Effective Speed Booster for Android phones.

Nox Cleaner is a Smart Cache Cleaner & Effective Speed Booster for Android phones. If your phone storage is insufficient or slowing down, Nox Cleaner totally can clear junk files, remove cache, and release storage space hence boosting phone performance and speed. Download Nox Cleaner and enjoy a lighter and speedier Android phone.

WHY CHOOSE NOX CLEANER?

Equipped with advanced mechanisms such as cache cleaner, junk cleaner, storage cleaner, memory cleaner, and ads cleaner, Nox Cleaner could improve not only phone storage space but also phone performance as well.

A powerful and effective antivirus system with a virus scanner, virus removal, and virus protection helps Android users protect devices from any potential security threat or privacy vulnerability.

HOW NOX CLEANER WORK?

Max Junk File Cleaner

With our powerful analytics engine, users will not only get more storage space from the cleaning process of cache, residual files, download folders, clipboard content, and more; users can also delete cache data from social apps such as Line, WhatsApp, or others without worrying about deleting the wrong file. One-touch & cache with junk files will be cleaned!

Real-Time Master Antivirus

Nox Cleaner will do the real-time virus scan including malware, adware, and online trojans, and remove viruses with potential privacy threats, hence protecting users against all the threats that can damage their phones. One tap then your phone is secured against all the potential viruses threatening your privacy!

Max Memory Booster

The excessive use of memory makes your phone heavy & slow. With just one click, Nox Cleaner can free up memory & make the phone lighter & faster. Nox Cleaner works smartly, hence making the experience on Android phones more comfortable.

CPU Cooler Master

Nox Cleaner intelligently detects and closes battery-draining apps to reduce CPU usage hence lowering phone temperature which helps users a lot when watching videos or playing games.

Game Booster Master

Boost your favorite games such as Free Fire, PUBG, or others, and enjoy max speed with a lag-free gaming experience. Try NoxCleaner’s Game Booster shortcut to get your games to run faster, and smoother and slay all the enemies blocking your way to victory.

Max Battery Saver

Analyzing battery usage status helps to find battery-draining apps automatically and stop them efficiently.

App Manager Master

Nox Cleaner provides information on apps that are not used based on usage. You can manage and uninstall apps that are rarely used to provide more storage space that can speed up Android storage & speed at maximum.

Image Manager Master

Nox Cleaner can analyze photo galleries and sort them into different albums where the users can see similar photos to delete.

App Locker Master

App Locker provides users with the utmost security from unwanted access to Facebook, Instagram, or even Gallery, Calls, or Messages. Lock the app easily & quickly with a Pattern, Fingerprint, and passcode!

NOX CLEANER NOTES:

> None of the personal data such as username or email address proceeds.

> All information will be kept secure and not shared with the 3rd party according to the Privacy and Cookies Policy.

> Fingerprint lock works only with devices running Android 6.0 or higher and fingerprint sensor support.

> Accessibility Service: We request Accessibility to provide a deep clean service and promise that the permission will not be used to read any of your privacy information or change your settings.

> VPN Service: We provide the VPN connection function for Android 5.0 and above users for remote access and we promise that the service will not be used in reading any of your private information or changing your settings.

If you like Nox Cleaner, please rate us five stars!

Email: noxcleaner@noxgroup.com.

Mod Info:
✪ Premium Features Unlocked
✪ Multi Languages
✪ CPUs: arm64-v8a
✪ Debug Info Removed
✪ Original Signature Changed

What’s New:
No changelog

This app has credit advertisements

More Info:
https://play.google.com/store/apps/details?id=com.noxgroup.app.cleaner&hl=en

Download Instructions:
https://ouo.io/fj1eGg

Mirrors:

https://ouo.io/bO57cS

https://ouo.io/7adM8ro

https://ouo.io/pgeOhu2

https://ouo.io/dE2Bq4V

Ampere v4.05 [Pro] [Mod Extra]
Requirements: 4.4+
Overview: Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.

Measure the charging and discharging current of your battery.

PRO features:
– Widgets
– Notification
– Alerts on device
– Alerts on Android Wear

The app works on Android 4.0.3+ devices. Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.

The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.

Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.

The current depends on many things:
– Charger (USB/AC/Wireless)
– USB cable
– Phone type
– Current tasks running
– Display brightness
– WiFi state
– GPS state

Please don’t use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.

If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.

Unfortunately some Samsung devices don’t give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.

Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.

If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).

Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.

LiPo batteries don’t draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.

– A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
– Dave’s (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk

Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3

Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime – fortuna3gdtv
➤ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 – d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 – degas3g
➤ HTC Desire 510 – htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G – pyramid

Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.

If the app doesn’t work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.

Please read also the FAQ: http://goo.gl/R8XgXX

What’s New:
v4.05
**New
➤ Android 13 release
➤ Battery optimization handling added
➤ Notification permission handling added
➤ Internal refactorings

**Changes
➤ Using latest Google libraries
➤ Bug fixes and optimizations

Mod Info:

• Pro / Paid features unlocked;
• Disabled / Removed unwanted Permissions + Receivers + Providers + Services;
• Optimized and zipaligned graphics and cleaned resources for fast load;
• Ads Permissions / Services / Providers removed from Android.manifest;
• Ads links removed and invokes methods nullified;
• Ads layouts visibility disabled;
• Google Play Store install package check disabled;
• Debug code removed;
• Remove default .source tags name of the corresponding java files;
• Analytics / Crashlytics / Firebase disabled;
• Send anonymous crash disabled by default;
• Startup tutorial disabled;
• Startup consent disabled;
• AOSP compatible mode;
• Languages: Full Multi Languages;
• CPUs: universal architecture;
• Screen DPIs: 120dpi, 160dpi, 240dpi, 320dpi, 480dpi, 640dpi;
• Original package signature changed;
• Release by Balatan.

This app has no advertisements

More Info:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere

Download Instructions:
https://ouo.io/c2Wpmx

Mirrors:
https://ouo.io/KW997z
https://ouo.io/LiR34fK
https://ouo.io/tUaAKc
https://ouo.io/oeeRgAC
https://ouo.io/y5fvqw

Night clock v2.10.33 [Premium]
Requirements: 4.2 and up
Overview: NightDream

… a desk clock that is also suitable for the night. In dock mode this app provides a simple digital clock that automatically adjusts its brightness, During the day the display is bright, but in the night it dims to a minimum brightness. Simply adjust the font size using a two-finger-zoom gesture.

Daydream

This app can be used as a Daydream from Android 4.2 on.

Quick alarms

Using a swipe from the left, you can set the alarm clock. Delete it by tapping on the lower right corner.

Battery

While charging your mobile device an estimate time is calculated until the battery is full.

Notifications

You can enable notifications for missed phone calls, GMail, WhatsApp and twitter. On Android 4.3+ go to Settings > Security > Notification access > enable NightDream.

In earlier versions of Android go to Settings > Accessibility > enable NightDream.

In-App Payments

The current weather conditions can be shown below the time. This feature purchased within the app

The project is open source. If you want to send a donation you can do this via in-app purchase.

.

Permissions

android.permission.MODIFY_AUDIO_SETTINGS

This permissions allows to siilence the device during the night mode.

android.permission.RECORD_AUDIO

During the night mode the screen may be deactivated. It can be switched on again if a certain ambient noise level is reached. Therefore the app continuously records audio. The app does not store audio data

android.permission.WAKE_LOCK

The app is allowed to wake the device from sleep in order to enable the screen and to keep the screen on.

android.permission.READ_EXTERNAL_STORAGE

The permission is necessary to read background images from the external storage.

Screen Lock

This app uses the Device Administrator permission. The permission is exclusively used to lock the screen while the app is running. Before uninstalling the app the permission must be revoked.

What’s New:
Swipe right on the alarm clock time to skip the next alarm and show the next alarm clock as a widget.

This app has no advertisements

More Info:
https://play.google.com/store/apps/details?id=com.firebirdberlin.nightdream

Download Instructions:
https://ouo.io/N5hpVV

Mirrors:

https://ouo.io/NHpMNig

https://ouo.io/nAFRbrP

https://ouo.io/zc3l1vu

https://ouo.io/8eqfKR

Lucky Patcher v10.4.4 [Mod Color]
Requirements: 4.0+
Overview: You can use this patcher to break some apps’ Android Market License Verification or other Verifications

Lucky Patcher is a great Android tool to remove ads, modify Permissions, bypass premium applications license verification, and more.

To use all features of Lucky Patcher, you need a rooted device.

Know :
Although stable, functioning of Lucky Patcher can’t be guaranteed at 100%.
So you are solely responsible of use of this application.
Under no circumstances Netbew will be responsible for any problems caused to your device (rebooting loop, unstable system, etc…).

What’s New:
10.4.4
Fix root patch for rebuild dex.

Mod
– Replaced the application icon;
– Replaced all black and white icons on color;
– Graphic compression without loss of quality;
– Optimized graphics and Zipalign;
– Duplicate graphics cleaned;
– Multi languages;
– CPUs: mips,mipspie,armeabi-v7a,arm64-v8a, x86, x86_64

This app has advertisements

More Info:
https://www.google.com/

Download Instructions: credit cenzo
Installer apk:(will generate a new random package name with every new install version)
https://ouo.io/bb6QEM

Mirrors:
https://ouo.io/DQUfIqQ
https://ouo.io/A7kxZG
https://ouo.io/pCtes3

Lite:
AOSP / En:
https://ouo.io/aCLrWi

Mirrors:
https://ouo.io/3HwLBR6
https://ouo.io/Zqy55h
https://ouo.io/3aW3FJu